- Home
- Electromechanical locks
- with beveled deadbolt (SM2xx)
- Promix-SM203
Promix-SM203
- Extremely simple installation.
- Can be installed both into doorframe and into door leaf!
- Normally open (open without supply voltage) or normally closed (closed without supply voltage) version.
- Low current consumption (only 85mA)!
- Original mechanism of “folding” the latch into the lock body when opening the door.
- Can be installed in any doors: wooden, aluminum, plastic, steel
Description
Designed for locking swing doors, gates and wickets, with the possibility of their remote opening with the help of controllers of access control system, audio and video intercoms, keypads.
The lock is available in two versions: normally open (open when the supply voltage is removed, and closed when the supply voltage is applied) and normally closed (closed when the supply voltage is removed, and open when the supply voltage is applied). When using the unblocking mechanism of Promix-AD.KM.01 lock, one can manually open the lock with a key.
The lock is cylindrically shaped, making it much easier to install - it is enough to drill a hole with a diameter of 24 mm and insert the lock into it. This allows to minimize carpentry.
Normally open lock can be installed outdoors provided that most of the winter time it is in the closed state (applied supply voltage).
Principle of operation of the lock
When closing the door (regardless of the lock design and availability of supply voltage), the tab is recessed into the lock body, as in a conventional mechanical door latch:
.png)
When the supply voltage is applied (for a normally open lock) or the supply voltage is removed (for a normally closed lock), the lock tab locks and prevents the door from being opened.
When the supply voltage is removed (for a normally open lock) or the supply voltage is applied (for a normally closed lock), the lock tab is unlocked and, when the door is opened, it “folds” into the lock body:
.png)
Strike plate is included in the package contents. If necessary, instead of the strike plate, one can install a mechanism to unlock Promix-AD.KM.01. lock. When using normally closed Promix-SM203 locks for premises with people, the installation of Promix-AD.KM.01 is mandatory, since it is necessary to ensure that people can leave in an emergency situation when the power supply fails (for example, in case of fire).
|
Lock connection options (power voltage can be applied to the lock by a switch, intercom, controller, etc.) |
|
Normally closed locks are unlocked by applying the supply voltage, while normally open locks are unlocked by removing the supply voltage. For operation, the lock requires a power supply unit and an ACS controller.
To open the lock, the ACS controller must apply the voltage to the lock or remove it (depending on the lock design), and hold this state until the door is opened.
Designation of the lock model:
Promix-SM203.XY.Z , where:
| X - lock version: |
0 - normally open, |
| Y - nominal supply voltage: |
0 - 12 V, |
| Z - availability of built-in sensors: |
0 (n/a) - no sensors, |
The modifications of locks available for order are shown in the table:
| Lock model | Description |
|---|---|
| Promix-SM203.00 |
Normally open (opens when supply voltage is removed), supply voltage 12V |
| Promix-SM203.10 |
Normally closed (opens when supply voltage is applied), supply voltage 12V |
| Promix-SM203.00.2 |
Normally open (opens when supply voltage is removed), supply voltage 12V, built-in lock status sensor |
| Promix-SM203.10.2 |
Normally closed (opens when supply voltage is applied), supply voltage 12V, built-in lock status sensor |
| Promix-SM203.01 |
Normally open (opens when supply voltage is removed), supply voltage 24V |
| Promix-SM203.11 |
Normally closed (opens when supply voltage is applied), supply voltage 24V |
| Promix-SM203.01.2 |
Normally open (opens when supply voltage is removed), supply voltage 24V, built-in lock status sensor |
| Promix-SM203.11.2 |
Normally closed (opens when supply voltage is applied), supply voltage 24V, built-in lock status sensor |
Technical characteristics
| NO | NC | |
| Holding force, kg, at least | 300 | |
| Direct current supply voltage UDC, V | 12±2 | |
| Duration of supply voltage application when: UDC = 10-11V, | not standardized | |
| seconds UDC = 11-14V, seconds | not standardized | maximum 120 |
| Duration of the pause between the applications of supply voltage |
not standardized |
At least equal to the duration of application |
| Input current (at UDC=12V), mA |
85 |
160 |
| Lock weight, kg, maximum |
0,1 |
|
- Body and tab material: steel with electroplated protective coating
- Face plate material: stainless steel
- Installation position: any
- Operating temperature range: -40...+30 0С
- Relative humidity: not more than 95% at 35°C and lower temperatures without condensation and hoar frost formation
- Resistance to climatic factors according to GOST 15150-69: UHL2
Documentation
Overall and installation dimensions of Promix-SM203 lock
Photos and videos
Example of installation in a metal door
Example of installation in a metal door
Example of installation in a wooden doorframe
Example of installation in a wooden doorframe
Example of installation of Promix-SM203 on a wooden door
Example of installation of Promix-SM203 on a metal door
Example of installation of Promix-SM203 on a plastic door
Example of installation of Promix-SM203 lock in a door leaf
Example of installation of Promix-SM203 lock: 1. Attach the template to the end of the door leaf
2. Glue the template to the end of the door leaf
3. Mark the mounting holes of the strike plate and the corners of the central rectangular groove
4. Close the door
5. Close the door
6. Close the door
7. Pull the template and glue it to the doorframe
8. Gently open the door
9. Unglue the template from the door leaf
10. Lay the template and mark the mounting holes for the lock
11. Drill the mounting holes
12. Drill the installation hole for the lock
13. Prepared hole for the lock
14. Insert the lock into the hole
15. Mark the lock outline
16. Select the groove for the strike plate
17. Groove for the lock plate
18. Connect the lock, insert into the hole, fasten with screws
19. Remove the protective film
20. Installation of the lock is over
21. Draw a rectangle according to previously marked corners to select the groove
22. Select a groove
23. Attach the strike plate and mark the contour according to previously marked centers
24. Select the groove for the strike plate
25. Install and fasten the strike plate
26. Remove the protective film
27. Installation of the strike plate is over
20.12.2021
We got another patent for electromechanical lock with flexible steel deadbolt Promix-SM325.
This lock is used to secure electric scooters operating in Kicksharing (rental)
17.12.2021
We are thrilled to introduce our new Official Distributor in United Kingdom - Electric Locking Systems LTD!!! Happy to be presented on the UK market and bring Promix products to british customers.
https:/www.electriclock.net/
+44.1202.94.1050
sales@electriclock.co.uk
17.11.2021
