Promix-SM308

Description

The lock is installed on the inner surfaces of the cabinet perpendicular to the door. The counterpart (deadbolt) is installed on the door.

Principle of operation: when the supply voltage is applied, the lock unlocks the door and pushes it out with the built-in pusher. Thus, the open door is immediately visible and there is no need to install a handle on the door.

The lock is equipped with a door position sensor with “dry contacts”.

Normally closed locks are unlocked by applying the supply voltage. For operation, the lock requires a power supply unit and an ACS controller.

To open the lock, the ACS controller must supply the supply voltage to the lock for a time not exceeding that specified in the technical specifications.

For emergency manual opening of the lock, it is necessary to shift the lever through the lock groove:

Designation of the lock model:

Promix-SM308.XY.Z color,   where:

The modifications of locks available for order are shown in the table (see colors above):

Features

• Flat shape, different colors and small dimensions allow to install the lock on any cabinet;
• No backlash of the closed door;
• Built-in door position sensor;
• Installation on metal and chipboard furniture;
• Low power consumption;
• Corrosion-resistant coating of lock parts;
• No necessity for preventive maintenance and lubrication for the period of operation.

Technical characteristics

Deadbolt holding force, kg, at least 250

Initial ejection force of deadbolt, kg, minimum 1.2

DC supply voltage, V 10-14

Supply voltage pulse duration, 1-10 sec

Interval between pulses of supply voltage, 15 sec

Input current (at 12V), mA, maximum 250

Documentation

Promix-SM308 Operating Manual EN (download)

3D-model of the Promix-SM308 (normally closed with door position sensor).STEP (download)

Overall dimensions of Promix-SM308 lock

Overall dimensions of Promix-SM308 lock deadbolt

Installation dimensions of Promix-SM308 lock

Photos and videos