- Home
- Controllers
- Promix-RDS.01
Promix-RDS.01
Built-in power supply 12V, 1.5 A. Easy connection: plug the controller into a 220V outlet, connect the lock to the terminal contacts of the controller.
Description
The remote control system "Promix-RDS.01" is designed for radio control of various actuators (maglocks, electric locks, electromechanical locks, latches, turnstiles, etc.).
The system includes: an executive device, a power source, a radio receiver, a controller, key fobs. The power supply, radio receiver, controller are made in a single structural unit (Promix controller-CR.RX.03, hereinafter referred to as the controller). The radio receiver of the controller provides reception of control signals of the Promix-CR.TX.01 key fobs. The power supply of the controller is used to control the connected devices.
Technical characteristics
Technical characteristics of the power supply unit.
The controller's power supply supplies the radio receiver, th controller and the actuator. The design of the power supply is pulsed, with galvanic separation of the primary and secondary circuits. The power supply has built-in protection against overcurrent and short circuit.
|
Supply voltage V (50 Hz) |
~180 - 230 |
|
Output voltage V |
12 |
|
Rated output current, A |
1,0 |
|
The maximum output current for a time of 1 min, no more than, A |
1,5 |
|
Protection tripping current (disconnection of the actuator), A |
2,0 |
Technical characteristics of the radio receiver.
|
Supply voltage, V |
12 |
|
Current consumption, mA |
2 |
|
Operating frequency, MHz |
433,92 |
|
Sensitivity, MV |
7 |
|
The range of reception of the signal of the Promix-CR.TX.01 radio unit (with line of sight), m, not less |
30 |
Technical characteristics of the controller.
Structurally the controller is made on the same board with a radio receiver. The controller performs the following functions:
*programming of radio remote controls and the control time of the actuator,
*setting the type of connected actuator (actuation when the control voltage is applied, actuation when the control voltage is removed),
*supply or removal of the power supply voltage of the actuator for a specified time according to the signals of the programmed keyfobs,
*disconnecting the actuator from the power supply (protection) when the current consumed by the actuator exceeds the set level,
*audible alarm of the current operations of the controller.
|
Supply voltage, V |
12 |
|
Current consumption, mA |
5 |
|
Protection tripping current (disconnection of the actuator), A |
2,0 |
|
The memory capacity of the remote control, pcs. |
10 |
|
The range of programmable control time of the actuator, with |
1-15 |
Technical characteristics of the radio remote control Promix-CR.TX.01
|
Output capacity, mW, maximum |
10 |
|
Coded mark length, byte |
4 |
|
Number of code combinations |
16777216 |
|
Battery power supply voltage (type 23А), V |
12 |
|
Power consumption with button held down, mA, maximum |
5 |
Documentation
Promix-RDS.01 - 1
20.12.2021
We got another patent for electromechanical lock with flexible steel deadbolt Promix-SM325.
This lock is used to secure electric scooters operating in Kicksharing (rental)
17.12.2021
We are thrilled to introduce our new Official Distributor in United Kingdom - Electric Locking Systems LTD!!! Happy to be presented on the UK market and bring Promix products to british customers.
https:/www.electriclock.net/
+44.1202.94.1050
sales@electriclock.co.uk
17.11.2021
